Most Popular
1500 questions
13
votes
5 answers
When is a child ready to switch from scooting to pedaling?
Last year, we bought a child-sized bike and removed the pedals. My three-year-old has been using it as a push bike (a.k.a. balance bike, run bike, or scooter) and learning how to balance. The plan is that once she's ready, I'll put the pedals back…
amcnabb
- 7,095
- 11
- 52
- 80
13
votes
5 answers
Is cycling better than walking to lose weight?
I want to lose weight. I commute to my office daily by walking 3 kilometers. If I buy a bicycle and use it for commuting (total 3 km daily), would it be better than walking?
Jitendra Vyas
- 263
- 1
- 2
- 9
13
votes
3 answers
What does "claiming the lane" mean?
If one is "claiming the lane" does that mean:
a) they simply ride on the street (i.e. on the left side of the lane in the US, Germany, France, ..) or
b) they are riding in the middle of the lane, with someone else side by side, or some other way…
Claus
- 413
- 3
- 9
13
votes
5 answers
walkable clipless pedal shoe to replace normal shoe?
I have a touring bike which I use almost exclusively for commuting. I am thinking about getting a clipless pedal with walkable shoes. At the same time, my normal shoes which I wear when not cycling need to be replaced, and am thinking that to save…
Michael
- 1,249
- 5
- 14
- 19
13
votes
6 answers
Training fasted: just about weight loss?
Preparing for a 100mile ride in August I was thinking of following a training plan which came in a "Sportive Guide" given away with Cycling Plus magazine this month.
Some of the days on the plan mention training for an hour before breakfast in order…
kevtufc
- 265
- 1
- 6
13
votes
4 answers
How often should I clean my bike?
How often should I clean my bike?
I've used it several times over the summer, but only once in muddy conditions, should I clean it after every ride or once per quarter?
user155695
- 2,913
- 8
- 23
- 26
13
votes
5 answers
Are aerodynamic rims worth additional weight?
I was under the impression that reducing the weight of your wheels is important. However, I'm noticing that many of the extremely high-end aerodynamic rims are actually heavier than cheaper rims by the same manufacturer.
For example:
Easton's…
user229044
- 3,576
- 6
- 29
- 48
13
votes
2 answers
What should I look for when purchasing a helmet?
I dont actually own a cycling helmet, but I'm thinking its probably a good idea to get one!
I want to buy one from the internet (mainly because its cheaper than stores), but what do I need to look for? How do I know which is the correct size?
user155695
- 2,913
- 8
- 23
- 26
13
votes
4 answers
What cleaner and oil should I use on my bike chain
Hope everyone is well. I need to clean and oil my chain as its getting a little clunky when I’m changing gears. I have no idea what I should be cleaning it with and then what I should oil with. Any help would be great. It’s a road bike that is used…
Tim Allars
- 223
- 1
- 3
- 5
13
votes
10 answers
How to keep my hydration pack tubes and valve from freezing?
I like to ride with a hydration pack when I mountain bike in the winter since all sorts of nasty stuff gets tossed up at my bottles. However, I've had issues with the tube or valve getting clogged due to the water inside freezing during rides in…
Benzo
- 18,185
- 29
- 106
- 172
13
votes
6 answers
New Chain causing skipping on cassette - will this work itself out or is it unsafe?
I just installed a new chain on my 2002 Trek 2200 Road Bike. The old chain was a Shimano 9 speed that I installed 18 months and about 5000 miles ago. It had stretched modestly and was full of winter cruft/grime. The new chain is a SRAM 9 speed,…
Dan Catlin
- 506
- 1
- 4
- 10
13
votes
6 answers
Preventing rust in bolt heads
I have several bikes and use them more and more in bad weather. I have no problem with rust on the chain, but I am seeing little bits of rust in the various hex bolt heads on the bike. What can I use to remove this rust and how can I prevent it from…
Gary E
- 1,606
- 1
- 12
- 16
13
votes
1 answer
What is the proper way to paint a bicycle?
I started a while back restoring a custom-built tandem bicycle, and I sanded it down to bare metal and just used spray paint (Rustoleum I think, took the bike completely apart to just paint the frame) to give it 5 or so coats, then a clear coat...…
cutrightjm
- 539
- 2
- 6
- 15
13
votes
4 answers
What would cause variable air resistance on a day with no wind?
I commute to work regularly. I find that on some days when there's no perceivable wind, I feel like there's almost no air resistance at all and it's so easy to ride at speed. It's also relatively quiet without the wind roaring in my ears.
On other…
Mac
- 9,126
- 17
- 55
- 82
13
votes
4 answers
do DT Swiss 240 hubs need proprietary tools to maintain them?
the bearings in my DT Swiss 240 hub appear to be shot, I have the toolkit for and am used to maintaining Chris King hubs but I wonder if I have to get special proprietary tools for the DT hubs as well?
tylernol
- 131
- 1
- 1
- 4