4

I've developed a water pump that is powered by a 1 watt solar air pump. In 24 hours it pumps 54 gallons to a height of 30 feet. How much energy have I harvested?

  • 1
    The pump is irrelevant. Just calculate the potential energy stored in that amount lifted that high (m * g * h) (I'm not doing that in an answer because the non-metric quantities are too complicated for me). Note that you can never fully reclaim that energy, because of conversion losses. –  Aug 30 '17 at 07:59
  • Thanks. I finally worked through it. The theoretical energy value (68.9 w) is quite a bit more than it takes to power the pump (24 w). That leaves 44.9 w – Anthony Scotti Aug 31 '17 at 17:15
  • Anthony, I'm not sure where/how you got 68.9, but w (I assume W) is Watts and is a rate of energy transfer (Joules/second) not a measure of energy itself (which Joules is). As per LShaver's answer, the total stored energy is ~18.3kJ. A 1W pump would draw (16060*24=) 86.4kJ over 24h. You have thus used 86.4kJ of electrical energy to store 18.3kJ of potential energy — making your pump (18.3/86.4=) 21% efficient. As Jan says, you can never, ever, get more energy out of a system than you put into a system due to losses and the Law of Conservation of Energy. – Tim Oct 11 '17 at 10:06

1 Answers1

5

Energy in the pumped water

  1. 54 gallons is about 200 L, equivalent to 200 kg
  2. 30 feet is about 9 m
  3. Using the formula @JanDoggen mentioned:

m ⨉ g ⨉ h = (200kg)(9.81m/s²)(9m) ≅ 18,000 kg*m²/s²

  1. This is the same as 18,000 joules (J) or 18 kJ
  2. We can convert this to watt-hours (Wh) easily:

18,000 J / (60 s ⨉ 60 m) = 5 Wh

Energy produced by the pump

Assuming a rough efficiency of 80% for the pump, this means the solar panel would need to produce about 6 Wh of energy.

Net energy output

Energy harvested:     6 Wh
Energy lost:          1 Wh
Useful stored energy: 5 Wh
LShaver
  • 11,885
  • 6
  • 30
  • 81
  • 54gal == 204.4L; 30' == 9.14m; Ep = 204.49.819.14 = 18,327J == 5.1Wh; 5.1/24 = 0.21W – Tim Oct 11 '17 at 09:43