Power On Self Test, a routine that a device runs immediately after turning on.
Questions tagged [post]
298 questions
3
votes
3 answers
No POST on previously working system
About four years ago I built this system:
Biostar TForce4 AM2 motherboard
AMD Athlon 64 3800+ @ 2.2GHz
2x512MB Corsair CM2X512A-6400 DDR2
ATI Radeon X1800XT (512MB RAM with dual outputs)
Antec SP-500 Power supply
Seagate 80Gig SATA
It worked…
Troy
- 33
1
vote
2 answers
My computer doesn't turn on? Bad motherboard?
I have an Asus P8Z68-v LX motherboard, an Intel i5-2500K CPU, and a Corsair CX600 PSU hooked up for a test boot. However, when I short the 2 power pins on the motherboard, nothing happens. No fans turn on, no beep, nothing. There's a green LED…
Isaiah Bugarin
- 161
1
vote
3 answers
Compaq Deskpro EN: 1 long beep, 2 short beeps, caps lock flashes
I have a Compaq Deskpro EN and I am getting one long beep and two short beeps on bootup, the caps lock light is flashing and no video. The case has a sticker which says this means "no video." But what video? There is no graphics card, at best there…
Thomas O
- 338
1
vote
1 answer
ASUS M4A785TD: 1 long beep two short beeps
I've been having problems with my home server restarting after a few minutes of being turned on. Here are the major components.
ASUS M4A785TD-M EVO
AMD Athlon II X2 250
HIS Radeon HD 5770
I opened it up and noticed that the heat pipe on the side…
aireq
- 661
1
vote
0 answers
ASUS Z170-A build won't POST on assembly
I've been trying to help a kid build his first PC, and I'm starting to get a little irritated. a lot of the components he got are overly complicated and complete overkill for the system he's building but heres a basic rundown of the system.
ASUS…
idiotITguy
- 11
- 1
0
votes
2 answers
New PC won't POST or boot
I finished the build of my new PC, and when I go to turn it on, nothing happens. I get no video and no POST beep. I removed the ram and turned it on again and it began to beep non stop. I used a voltammeter to check if the APX_12V was putting out…
GaMERCaT
- 1
0
votes
1 answer
Wget/Curl post form and get php message
Platform, client and server: Ubuntu 14.04 Server
I have the following html form with php (called 0.php):
0
votes
1 answer
no display, no beep sounds, no keyboard or mouse lights
Possible Duplicate:
What Reasons Would A Computer Power Up But Not Boot?
My pc is was working fine yesterday and today when i try to turn it on, the CPU powers up, all the fans spins but there is no display, no beep sounds, no keyboard or mouse…
LiveEn
- 237
- 1
- 3
- 10