I wanted to port forward so I can host my own MC server etc... But I realized that my router's public ip is private. Any suggestions I'm using TL-WR740N Thanks.
Asked
Active
Viewed 1,285 times
0
-
3Does this answer your question? Set up a web server behind a Carrier Grade NAT – Kamil Maciorowski Jan 22 '21 at 08:00
-
see if it's helpful to you: https://superuser.com/questions/1619788/how-to-port-forward-on-a-private-ip – Gloria Gu Jan 25 '21 at 08:26
2 Answers
4
This is not possible without the support of your upstream provider - who would need to set up port forwards on their equipment to your router.
An alternative us to bypass the problem using a VPN with a static IP provider or doing a reverse tunnel through another box with a known IP (eg using SSH)
davidgo
- 70,654
-1
This is typically done in the case of a server on your network that has a private IP, when you would like to make the server publicly accessible through it’s public IP address. You would set this up in a firewall by configuring the NAT settings.
-
1This is not a correct answer. The question explicitly states that the router’s public (which I assume to mean WAN side) IP address is a private address, i.e. their provider probably uses carrier grade NAT. – StarCat Jan 22 '21 at 12:02
-
I don't know only thing I know that is my WAN ip is private (router) and the device that gives me internet and others is in my roof. – JokeGamer Jan 23 '21 at 12:02