I have ubuntu 22.04 server on my vm in esxi and iam new for this
The size of my current directory(/home/<username>) after login is only 100GB
df -h .
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/ubuntu--vg-ubuntu--lv 98G 11G 83G 12% /
I gave a 2.2 TB hard disk but only 100GB (sda->sda3->ubuntu--vg-ubuntu--lv) mounted in /. Here is the lsblk result
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
loop0 7:0 0 62M 1 loop /snap/core20/1611
loop1 7:1 0 67.8M 1 loop /snap/lxd/22753
loop2 7:2 0 47M 1 loop /snap/snapd/16292
loop3 7:3 0 63.9M 1 loop /snap/core20/2182
loop4 7:4 0 91.9M 1 loop /snap/lxd/24061
sda 8:0 0 2.2T 0 disk
├─sda1 8:1 0 1M 0 part
├─sda2 8:2 0 2G 0 part /boot
└─sda3 8:3 0 2.2T 0 part
└─ubuntu--vg-ubuntu--lv 253:0 0 100G 0 lvm /
sdb 8:16 0 500G 0 disk
└─sdb1 8:17 0 500G 0 part /tg-rootdir
sr0 11:0 1 1.3G 0 rom
And here is thedf -h result
Filesystem Size Used Avail Use% Mounted on
udev 504G 0 504G 0% /dev
tmpfs 101G 1.5M 101G 1% /run
/dev/mapper/ubuntu--vg-ubuntu--lv 98G 11G 83G 12% /
tmpfs 504G 0 504G 0% /dev/shm
tmpfs 5.0M 0 5.0M 0% /run/lock
tmpfs 504G 0 504G 0% /sys/fs/cgroup
/dev/loop0 62M 62M 0 100% /snap/core20/1611
/dev/sda2 2.0G 106M 1.7G 6% /boot
/dev/loop1 68M 68M 0 100% /snap/lxd/22753
/dev/loop2 47M 47M 0 100% /snap/snapd/16292
tmpfs 101G 0 101G 0% /run/user/1000
/dev/loop3 64M 64M 0 100% /snap/core20/2182
/dev/loop4 92M 92M 0 100% /snap/lxd/24061
/dev/sdb1 492G 95G 372G 21% /tg-rootdir
and this is the disk path in the General Information Tab of the VM
Disk Path Capacity Free
/ 97.87 GB 82.59 GB (84%)
/boot 1.9 GB 1.68 GB (88%)
/tg-rootdir 491.08 GB 340.17 GB (69%)
So I want the remaining unused disk on sda3 to be put in the same place as the 100GB one so that /home/<username> becomes bigger.
Should I create a new partition from sda3 or just extend the ubuntu--vg-ubuntu--lv? or any suggestion?
Thank you Best Regards,
