0

This is the setup I'm planning to use: Camera is an Olympus OMD E-M10 II, the lens is a Bower 500 mm f/6.3 using a Bower T mount to micro four thirds adapter.

The cause for my concern is that I plan to mount this on a tripod, which requires putting the camera on the tripod, since the lens does not have a tripod mount on it.

This in turn means the camera has to support the entire weight of the lens: about 1 lb 6 oz. If it's necessary for getting an answer, I'd estimate the center of gravity of the lens is between 3 and 4 inches from the mount.

Am I safe mounting this lens on the camera body, and then placing the camera on a tripod?

dgnuff
  • 113
  • 4
  • Would disagree with the "duplicate" assessment: The setup intended has many potential problems that are not about damaging or wearing out the lens mount. However, if (as I suspect) the 500mm f6.3 you are talking about is a catadioptric, you'll probably be fine. If it is a non-telephoto long lens with the given specs, the tripod head could yield or break (ITWC crashing the camera)!! – rackandboneman Dec 08 '18 at 19:34

1 Answers1

1

Lens mounts are fairly sturdy things - but why risk it when the good people at manfrotto make these?

enter image description here

I can't comment about the particular lens and body combo - but I will say that adding the adapter adds an additional weak point. So, I think you're better off not chancing it and getting something like the linked item to add some telephoto support.

Michael C
  • 175,039
  • 10
  • 209
  • 561
OnBreak.
  • 20,509
  • 5
  • 49
  • 81