How do I take a very long exposure shot from EOS M? I see when i reduce the shutter speed to bulb setting, i see the picture is completely over exposed.
Asked
Active
Viewed 2,542 times
1
-
3Possible duplicate of What is the "exposure triangle"? – thebtm Jan 06 '16 at 18:21
-
Triangles still have nothing to do with it. :-/ – mattdm Jan 06 '16 at 19:40
-
4Depending on what you mean by "very long", How do I meter for long exposures (10+ minutes)? may cover your question. – mattdm Jan 06 '16 at 20:20
-
Are you shooting in the daytime or at night? – inkista Jan 22 '16 at 04:25
2 Answers
3
Bulb mode allows you to control when the exposure starts and finishes, which means that you control the shutter-speed. Together with ISO and Aperture, you still need to balance the 3 parameters and get a proper exposure. See Exposure Triangle if you are not familiar with the concept.
To be clear, you do not reduce the shutter-speed to bulb. You take control of shutter-speed with bulb.
Now you have to use choose a shutter-speed. The easiest way is to get the camera to meter and then balance with other exposure parameters. Usually, I take a shot in Aperture priority mode at a ridiculous ISO, say 25600. If it comes out exposed properly, note the shutter-speed and then calculate how long it would take at a low ISO, say 200. You can work this out in your head but you don't have to anymore, as they say there's an app for that. The one I use simply called Exposure Calculator.
The other option is to meter at the desired ISO with a set aperture again and note the shutter-speed. Then, add an ND filter, do the math to adjust the shutter-speed. Again, there is an app for that. The one I use is called ND Filter Calculator. For ND filters, the math is very simple. ND4 == 2 ^ 4 == 16, so multiply the shutter-speed without the ND filter by 16.
Some cameras show a counter on the screen or on the top LCD. If that is not the case with the EOS M, use a watch which shows seconds. You should really not have to worry about fractions since it is hard to react with accuracy.
2
Your question isn't exactly clear on your objective, so I will provide a few potential solutions.
Use your cameras histogram to judge the exposure. See: How and why do you use an image histogram?
Calculate the proper exposure. See: What is the "exposure triangle"? or Long Exposure Tutorial
Use a neutral density filter. See: What are neutral density filters and how do I use them to create long exposures in daylight?
Or you could simply lower your ISO and use a smaller aperture if you aren't already at the limits of what your camera can do.
