What causes this weird angled glowing blur around lights on my low light shots?

Question

I've been trying to figure out why this is happening for a few weeks. When I take pictures, usually during evening times when the sun starts to set and the street lights come on, I see this weird sideway blurry effect on lights. And when I try to take long exposure shots at night (on a tripod), those sideways blurry light effects are still there! (instead of the ususal star effect). Why is that? What am I doing wrong??? I have a clear lens filter but I've tried taking it off and the problem still doesn't go away. I posted an example below. The settings are ISO 200, f/5.6, exposure time 1/80. I am using a Nikon D3100 with a 35mm prime lens.

example picture

It would be useful to know what lens you are using (and camera, but that is less important). — damned truths, Mar 08 '15 at 08:52
Thank you. I added that. I am using a Nikon D3100 with a 35mm prime lens. — juztroublez, Mar 08 '15 at 08:54
I know you say this also happens with the clear filter off, but do you have an example of that? — mattdm, Mar 08 '15 at 11:28
It's exactly the same mate. That's what confuses me. Everything else is in focus but what is going on with the lights? — juztroublez, Mar 08 '15 at 11:32
The lens is also a Nikon. When you say stopping down the aperture, what does that mean? I just got an idea after reading your comment. I'm gonna put the kit lens back on and see what happens. I think that might narrow it down to whether or not the problem lies with the lens. — juztroublez, Mar 08 '15 at 11:54
JoanneC: I didn't feel it was a definitive answer, I was just speculating given the available information. Had I known for sure then I would have used the Answer section. — Darkhausen, Mar 09 '15 at 00:05
@mattdm thank you for the explanation. I always wondered what the exact terminology for that was. Thanks. — juztroublez, Mar 09 '15 at 05:19

score 7 · Accepted Answer · answered Mar 08 '15 at 14:57

You have a light smudge or a very minor abrasion on the surface of your lens, running at 90 degrees to the direction of the highlight smearing you are seeing. It probably won't be visible on the lens unless you get the angle of the light just right. If it's a smudge, a good cleaning (with a good cleaner - use tissues or fabric designed for the purpose and a solvent/cleaner that's meant for cleaning lenses) will clear it up. If it's an abrasion, you won't be able to get rid of the smearing yourself without risking further damage to the lens coating; a trip to the service depot would be in order.

What you are seeing is basically a much lighter version of the Vaseline smears, "star" filters and diffusion filters that can be used on purpose to create interesting photographic effects. Reflection and diffraction from the edges of any ridges in the smear, scratches in the filter, or the threads of the fabric used as a diffusion net cause some light to spread out perpendicular to the direction of the artifact. In those cases, though, the smudge, screens and scratches is much heavier, so the effect will show up in areas of lower contrast. Here, you're only seeing the effect around areas that are significantly brighter than their surroundings (clipping or nearly clipping at least one channel), so even if the spread-out light is down a couple of stops (that is, it's significantly lower in intensity than the light source itself) it still adds significantly to the exposure of darker areas around the light source.

Yes. It is possible that this smudge is towards the edge of the lens so it only comes into play when you use lower f stops. — Floris, Mar 09 '15 at 04:01
Ok I'll give it a shot. I have one of those cloths that you get when you buy a new phone they give you to wipe the screen? I think it's the same kind they call microfiber cloth? — juztroublez, Mar 09 '15 at 05:09
@Floris - Even a deliberate filter (such as a diffusion net) that covers the entire lens will have a greater effect with a wider aperture. As you close down, the reflection/diffraction sources become smaller (less blurry/more in focus), and the effect can either be lost in detail or the source of the effect itself becomes visible in the picture. Since it's so easy to do in post, "nobody" does it when shooting anymore, but it was common to at least explore what happened with Vaseline on a filter or stretching a stocking over your lens back in the film days. — user38275, Mar 09 '15 at 14:31

score 0 · Answer 2 · answered Jun 25 '22 at 16:08

0

Don't use a tissue to clean your lens or filter because they're made of plant fibres and may scratch (at least that's what I read years ago).

answered Jun 25 '22 at 16:08

user106610

1

1

Your answer could be improved with additional supporting information. Please [edit] to add further details, such as citations or documentation, so that others can confirm that your answer is correct. You can find more information on how to write good answers in the help center. – Community Jun 26 '22 at 19:36

What causes this weird angled glowing blur around lights on my low light shots?

2 Answers2