2

Possible Duplicate:
What is noise in a digital photograph?

This happens while talking photos on dark or night. The Black color is not black, it has some noise. What would be the reason for noise creation and how can I reduce that while talking photos??

Community
  • 1
Hariharan Anbazhagan
  • 273
  • 1
  • 4
  • 13

2 Answers2

7

The thing that creates noise is not enough light.

You can think of your image has having a constant amount of noise (this is a big inaccurate over simplification, but it helps understand the issue), when you are photographing something nice and bright the sensor captures a lot of data and it completely overpowers the noise.

On the other hand if you are photographing a completely dark scene there is not data at all (because no light is hitting the sensor) and you are left with noise only.

ISO raises the brightness level of everything, both the real data and the noise - so high ISO images tend to be noisier.

However, in most cameras the ISO amplification is done early in the process, before some of the noise have a chance to get in - so an high ISO image will have less noise than a low ISO image that is brightened up in post processing.

So - to reduce noise:

  1. Try to get more light into the camera - use a wider aperture, slower shutter speed and where appropriate flash.

  2. Use the lowest ISO that get's you the correct exposure - that is, prefer lowering the ISO and slowing the shutter to using an high ISO, but if you have no other choice using high ISO is better than increasing brightness in post prossesing

  3. And finally, there are some excellent noise reduction programs you can use in post processing

Nir
  • 20,825
  • 4
  • 38
  • 74
1

I think that the biggest noise-creator is ISO setting. Try to set ISO to 100 (or the lowest your camera offers).

If you are shooting in night with flash, than white spots could be dust or some particles in air, which are illuminated by flash.

zacharmarz
  • 680
  • 1
  • 5
  • 16
  • Thanks for your reply, sure i ll try using lowest ISO. Usually i dont use flash :) – Hariharan Anbazhagan Nov 29 '12 at 06:46
  • 4
    -1 ISO only indirectly influences signal to noise ratio, by causing the camera to chose a different shutter-speed/aperture when in one of the auto-modes. It is not a "noise creator", it only amplifies the signal revealing noise already present. – Matt Grum Nov 29 '12 at 09:23