When using color film in my Minolta X370 my pictures come out black and white. What needs to be repaired in the camera? Any idea approximate cost? Thanks
-
2Nothing is wrong with the camera. The film processor may have made a mistake. – DrMoishe Pippik Aug 20 '21 at 19:18
-
Has the camera worked for you in the past? If so, what's changed (e.g., using a new kind of film? Using a new lab?) Can you maybe take pictures of the negatives with your phone (preferably, looking through the negatives at a bright background) and add them to your question? What exact kind of film did you use? – Solomon Slow Aug 20 '21 at 21:30
-
Re, What DrMoishe Pippik said; There's nothing in a film camera that knows or cares whether you are shooting black and white or color. The magic sauce that makes the difference is all in the film and, in how the film is processed. – Solomon Slow Aug 20 '21 at 21:31
-
Please provide the film name/type you used. You can read it on the negative. – J.Hirsch Aug 21 '21 at 13:46
2 Answers
Cross processed color film in black & white chemistry yield black & white images. However, the dyes that comprise a color image are still present. Cross processed film can be saved. Return the film to the photofinisher. Ask to have the film re-printed. If cross processed, the film is swished in the bleach solution for about 5 minutes and then washed and then put through the entire color film developing process. The result will be sub-standard color images that can be printed.
- 39,160
- 3
- 48
- 91
Your color film was almost certainly cross processed by mistake.
If color film is (cross) processed in B&W chemicals it will result in varying degrees of monochrome images... they often have a bit of a tint, but can be completely B&W as well.
https://shootitwithfilm.com/developing-color-film-in-black-and-white-chemicals/
- 17,087
- 1
- 11
- 33
-
Thanks to all of you for your advice. I will do some work on your suggestions - I certainly appreciate your responses. Donna – Donna Aug 22 '21 at 14:05