Throw out bell of starter not returning and pinion spins inside bell
Asked
Active
Viewed 167 times
1
-
A poor connection or damaged wire? – Solar Mike Nov 27 '20 at 04:48
-
Which earth wire is burning? Can you add a photo? – HandyHowie Nov 27 '20 at 07:24
-
Is there a thick earth wire connected that is as least as thick as the wire that goes from the battery positive to the starter? – HandyHowie Nov 27 '20 at 07:25
-
Previous owner went for like a 8mm cable to a 10-12 mm cable and soldered at a join about 18 inches from solenoid. Will attach pic. – Mark Jackson Nov 27 '20 at 11:56
-
Just added pics of cables – Mark Jackson Nov 27 '20 at 12:09
-
1Replace those joined cables. – Solar Mike Nov 27 '20 at 12:12
-
1Is it the 8mm cable that is burning? – HandyHowie Nov 27 '20 at 12:54
-
Yes the 8 mm is the one that has melted through – Mark Jackson Nov 27 '20 at 22:37
-
If the 8mm cables are original, it would suggest to me that the starter is faulty and is drawing too much current. – HandyHowie Nov 28 '20 at 09:04
-
No the original cable is the larger of the 2 – Mark Jackson Nov 29 '20 at 11:53