1

I used grass gis v.surf.rst function to interpolate a surface using vector points. But it is very difficult to find a optimum parameters to be used. I am still unable to develop a accurate terrain

underdark
  • 84,148
  • 21
  • 231
  • 413
Thilina
  • 29
  • 3
  • 1
    Welcome to gis.stackexchange! Please note that a good question on this site is expected to show some degree of research on your part, i.e. what you have tried and - if applicable - code so far. For more info, you can check our [faq]. – underdark Feb 06 '16 at 22:27

1 Answers1

2

At first, as you did not tell, you want to create a raster form the points. A similar question about this can be found here: How can I create a DEM from Point Data? Second, I think there are tools in grass, callable from qgis, to make a depressionless dem, like the r.fill.dir tool. Other GIS-people tend to use saga gis functions, as described here: http://www.saga-gis.org/saga_module_doc/2.1.3/ta_preprocessor_4.html. For myself I always used arcgis functions from hydrology toolbox.

Community
  • 1
Andreas Müller
  • 2,622
  • 13
  • 20
  • I used grass v.surf.rst function to interpolate raster from points.But it is difficult to find optimum parameters to be used and i am still unable to develop an accurate terrain – Thilina Feb 07 '16 at 14:23