Questions tagged [z-offset]
6 questions
2
votes
1 answer
Why does my Labists X1 mini printer float 1 cm above the bed even after homing it?
I pulled my Labists X1 mini printer out of jail after about 3 years, and tried to get it working. I'd only ever printed the pre-sliced files from the supplier, but now needed something I'd designed myself.
It wasn't feeding the PLA which I tracked…
android.weasel
- 161
- 3
2
votes
1 answer
Is there any well-documented 'auto z-offset' (DIY) upgrade available for 3D printers?
In addition to the question How can a force sensor automatically determine the Z-offset?.
Is there any well-documented 'auto z-offset' (DIY) upgrade available for 3D printers? I'm particularly interested in using a strain gauge and upgrading the…
Bob Ortiz
- 1,245
- 1
- 10
- 42
2
votes
2 answers
How can a force sensor automatically determine the Z-offset?
The Creality Ender 3 V3 SE, apart from auto bed leveling (ABL), also has a way to calculate the Z-offset automatically. A feature I didn't hear about before.
According to a Maker's Muse video, it's based on a force sensor as shown below.
How does…
Bob Ortiz
- 1,245
- 1
- 10
- 42
1
vote
1 answer
Z offset with Creality bed leveller
Been using my Creality Ender 3 Pro with a Creality auto bed leveler, for a few years now with the PrusaSlicer software, to slice.
I have had to manually drop the Z-offset by -1 mm on every print, to get the best 1st layer. I don't have a problem…
Phil Bagley
- 11
- 2
1
vote
1 answer
How to lower the nozzle height by 0.2 mm?
Here are the details of my printer:
Creality Ender 5
STM32F103RET6
CR Touch: - Model: ALT04 - CX: 231120001838
Mainboard: v4.2.7
I’m trying to adjust the nozzle height on my Creality Ender 5 (4.2.7 + CR Touch) to -0.2 mm, so that it’s closer to…
viikktor_
- 11
- 2
0
votes
1 answer
First layer flow rate too low or global nozzle Z distance too large?
I had a problem with ASA part warping and not sticking to the build plate as shown by this question and answer
Issue stem from under extrusion of the first layer and was solved by bumping first layer flow rate from 100 % to 120 %.
I am wondering,…
sanjihan
- 123
- 7