1

I am making my own printer. I used Repetier as firmware, made all cable connections, and installed the software. The screen came on and I connected it to the computer at the right frequency, but the motors can only move in one direction (plus) and when I select and click the G-code file, it does not react. What could be the reason for this?

agarza
  • 1,714
  • 2
  • 16
  • 33
MUHAMMED EMİN GÜNER
  • 21
  • 2

1 Answers1

1

I am very sorry for the incomplete information and for getting back to you after a long time. The problem was that I did not set the pull-up, pull-down status of the endstops in the firmware.Thank you for friends who are interested.

MUHAMMED EMİN GÜNER
  • 21
  • 2