15

I've got a new iMac (Santa must have thought I was a good boy this year) and I want to move data from my 3 year old MacBook (Intel, running Snow Leopard). I realise I have a few options for this, but migration assistant is currently looking better than either starting from fresh or Carbon Copy Cloner etc.

What I would like to know is if migration assistant will bring across everything from a 3 year old system, including all the remnants of applications I have installed and deleted etc. If it does has anyone got any hints to stop it doing this?

LC1983
  • 1,243

2 Answers2

7

You should not use CCC between Macs. Every Mac has a set of drivers configured for the current hardware during installation. When you use CCC to clone to another Mac, you are getting the setup, which is not optimized for that Mac.

Use Migration Assistant. I had to migrate several Macs in the past, restoring from the Time Machine or copying from older Macs. Migration Assistant never failed. I have lots of apps and some of them are copy-protected and have own drivers (I am a developer). Migration Assistant took care of almost all of them. I only had to confirm Adobe CS3 serial once.

Go for Migration Assistant: a couple of clicks, wait and you are done.

User366
  • 2,040
5

I've migrated between many macs over the years, and I've always found that the best way to do it, is manually. Normally I use a firewire cable (but you can also use WiFi, USB, external hard drive, dvd/cd, etc) to hook up the two computers, then just drag over files from one computer to the other.

Mostly everything the average user has on their mac will be found in their user folder (home folder). You can just drag/copy this entire folder over, or you can be more selective about which folders in your home folder you move (for instance, you may not want the Library folder). Then, anything outside of your home folder (Applications, for one) you can drag/copy over if you want.

matthewpavkov
  • 414
  • 1
    +1 for this. I am Apple and Microsoft certified (ACSP and ACTC), and I have never found utilities that migrate your data to work as well as doing it manually. – Harv Dec 26 '10 at 00:19
  • Thanks, I thought that may be the case, I want the home folder to be the same (although looking through the library folder there are some things I don't want). When importing applications do they create all the necessary folders (in library etc)? – LC1983 Dec 26 '10 at 12:54
  • 1
    @LC1983 No. It'd be best to reinstall applications. But, depending on the application, you could grab its relevant folder(s), for instance, those in the ~/Library folder, and then the application itself. This may or may not be all the folders/files the application installed for itself, which is why I believe re-installation is best. If you can't reinstall (or don't want to), grabbing the application itself should be enough for it to work (and it should create what folders/files it needs, when the time comes). – matthewpavkov Dec 27 '10 at 07:35
  • 2
    I agree with the answer but it doesn't answer the question, which is, What does migration assistant migrate? It's not, Should I use migration assistant? – Jason Aug 05 '13 at 19:03
  • 1
    @Jason Yes, I agree, I did not explicitly address the question. But, what's implied from my answer is that, no, Migration Assistant will not migrate everything between two computers - not reliably, at least. If you, or anyone else, adds an answer that better addresses the question, I'd be happy to upvote it. – matthewpavkov Aug 06 '13 at 16:19
  • @matthewpavkov - In cases where I no longer have the install disc or serial numbers, how do I move manually? A number of applications will act as if they were just installed and ask for a serial. In my case, all I want is to swap the boot drive for a bigger one, and not lose 4 years worth of purchased software. – JTP - Apologise to Monica Nov 10 '13 at 22:09
  • @JoeTaxpayer In your case, I'd suggest cloning the boot drive to your new hard drive. Anything short of that, and you may find that your software is no longer authorized. With that said, you may have this problem regardless of what you do. It really depends on the software - some software may "know" that it's been moved. However, if you make an exact clone, I'd guess that you wouldn't have an issue. It's been a long time since I've done something like that. Not 100% sure what will happen, but I think that's your best (only) bet. – matthewpavkov Nov 11 '13 at 16:20
  • 1
    Thanks, Matt. In my next life, I will keep install discs and install software safe, along with their serial numbers / sign in. – JTP - Apologise to Monica Nov 11 '13 at 19:30